Why is wood flooring cracking?

- Mar 03, 2021-

Seeing “cracking” in wood floors is seasonal and common.

Wood flooring, because it is a natural product and contains some level of water content at all times, will expectedly behave like a natural product, and not with the characteristics of plastic or laminate flooring.

Moisture content in the wood in your home or business changes as the moisture in the environment changes. When the ambient air dries out, the wood also dries out, causing it to shrink to varying degrees.

Winter weather hits wood flooring twice. When temperatures begin to drop homeowners turn on or up their heating system and start keeping doors and windows closed. This heat dries out the home and moisture is pulled from the wood causing the wood to shrink. Areas around fireplaces, furnaces, heating ducts, as well as wall and baseboard heaters are especially bad for drying out hardwood floors, with particular noticeability in areas surrounding wood stoves.

Later, when the air temperatures outside begin to fall below freezing, much of the remaining moisture in the air falls out as snow, frost or ice. So, when we get a longer cold spell with ice or snow, we may experience more shrinkage in wood floors than usual. The upper floors in a home or building may experience even greater issues if proper humidity levels are not maintained (heat rises).

As temperature and humidity changes occur in summer, seasonal cracking begins to remedy itself. As moisture is replaced back into the air, moisture is absorbed back into wood. Expansion occurs and wood floors begin the process of trying to return to their original, pre-winter-season condition.

It is important to remember that shrinkage and expansion is not a flaw in the wood or an installation-related problem. Just remember that part of the beauty and enjoyment of your wood floors comes from the changes that will occur when you live with a natural product in your home.

Low Humidity Levels can Damage Your Floor. Low levels cause wood to dry out, which, in turn, can weaken the wood, causing the floor to splinter, “crack” and/or gap. This drying out process can also lead the floor to “check”, meaning the wood can split along the grain. Low humidity can also damage the finish, which would become an issue during your regular maintenance.